Back to top

Bare Curves Invisible Bra

RM159.00

Our invisible adhesive bra, designed for secure hold, natural lift and invisible support under low-cut, strapless and backless outfits. More freedom for the outfits you actually want to wear.

Powered by Pink Hydrogel Adhesive, Bare Curves uses body heat technology to create a stronger grip that sticks up to 90% better, while the breathable hydrogel helps reduce sweat for a more comfortable wear.

Its 3D Push Up Cups follow the natural curves of the bust to enhance shape, lift and cleavage, while the 2cm graduated Airy Foam padding is thinner on the outer cup for better adhesion and thicker towards the centre for a natural push-up effect of up to 1 cup size.

Unlike traditional adhesive bras with a centre clipper, Bare Curves features a single-unit, no-clipper construction. The centre gore sits naturally beneath the bust to create smoother curves while helping reduce digging and centre spillage.

Made with a lightweight, breathable fabric-based construction, Bare Curves sits smoothly under clothing without adding unnecessary bulk. The low bandeau neckline is designed approximately 2cm lower at the top of the cups, helping the bra stay hidden under lower-cut outfits.

Bare Curves gives you the confidence of a push-up bra with the freedom of an invisible bra.

Size And Materials Chart Find My Size

RM41.00 More For Free Delivery in Malaysia

OTHERS CHOSE

How to wear Bare Curves?

Check the size with the clear film still on. Trying it on counts as one of its wears.

  1. Step 1: Check the fit
    1 · Check the fit

    Make sure the cups cover your bust properly for the best shape. Do this with the clear film still on.

  2. Step 2: Prep your skin
    2 · Prep your skin

    Clean, dry, and free from lotion, oil or perfume.

  3. Step 3: Flip the cups
    3 · Flip the cups

    Turn the cup outwards so it sticks smoothly to your skin.

  4. Step 4: Align the first side
    4 · Align the first side

    Line up your nipple with the inner edge of the cup.

  5. Step 5: Angle the first side
    5 · Angle the first side

    One side at a time. Hold the cup diagonally, angled downwards.

  6. Step 6: Lock the first side
    6 · Lock the first side

    Smooth it upward over your skin.

  7. Step 7: Push the second side
    7 · Push the second side

    Push your bust toward the centre.

  8. 8 · Align the second side

    Line up your nipple with the inner edge of the cup.

  9. 9 · Lock the second side

    Smooth it over to secure the hold and create that full, seamless cleavage.

  10. 10 · Check both sides match

    Check in the mirror that both sides look even.

  11. Step 11: More push-up
    11 · More push-up (optional)

    Peel back the outer edges, gather your bust further toward the centre, and re-stick.

  12. Step 12: Lock it in place
    12 · Lock it in place

    Press both cups firmly with your palms for about a minute to lock the adhesive in place.

1 / 12 · Swipe

See any bulges spilling out? Use your fingers to smooth the outer edges flat against your skin for a seamless finish.

Give yourself a few practice runs before your big event.

How to remove it?

Wet the edge of each cup with a little water, then peel it off slowly.

How to wash it?

Wash it by hand after every wear, to remove sweat, body oil and dirt. Soak Bare Curves fully in a bowl of water.

Use a liquid detergent on the adhesive. Never body wash or shampoo: their added moisturiser ruins the adhesive.

Rub the adhesive gently in circles, cleaning from the inside out with your thumb. Never use your nails.

Rinse thoroughly to wash away all the soap, then gently press the cups between your hands to remove excess water.

Washing after every wear is what keeps it sticky.

How to dry and store it?

Lay the clear film loosely over the adhesive to guard against dust, but don't press it down yet. Let it air-dry in a clean spot with little dust and humidity.

Never dry it with a towel or tissue: it permanently damages the stickiness.

Once it's completely dry, press the film down firmly to keep the adhesive sealed, and keep it in its box.

Store it somewhere cool and well-ventilated, away from direct sunlight and stuffy spaces like a storeroom. Put the film back on after every wear, even before you wash it.

Will it stay on in hot weather?

The pink hydrogel is activated by body heat and it's breathable, which helps reduce sweat. For the best hold:

1 · Skin

Clean and completely dry, with no lotion, oil, perfume or powder where the cups sit.

2 · Placement

One cup at a time, angled downwards, then smoothed upwards.

3 · Pressure

Once both cups are on, press them firmly with your palms for about a minute.

Sweat and body oil slowly weaken any adhesive. If it starts to lift, take it off, wash it and let it air-dry, and the grip comes back.

How many times can I wear it?

With good care, you'll get about 5 to 10 wears at its best grip. The adhesive weakens a little with every wear and adjustment.

For hygiene, we recommend replacing it after about 3 months.

Trying it on counts as a wear, so check the size with the clear film still on.

Which cup size should I choose?

Bare Curves is sized by cup volume, not by letter. Find your everyday bra size:

A · 70A, 70B, 75A
B · 70C, 75B, 80A, 85A
C · 75C, 80B, 85B
D · 70D, 75D, 80C, 85C

Not sure? Don't stick it on yet. Ask us on WhatsApp with your upper and lower bust measurements, and we'll check it for you, usually within 24 hours.

CLOSE
Prices in RM, with approximate S$ Prices in RM

Show prices in

You always pay by card in RM. PayNow, for delivery to Singapore, is charged in S$.

Show prices in