Angels Wing Float

Ages 14 & up. Floats are not a life saving device. Do not leave children unattended while in use.

1. Unfold and lay your float on a flat surface, clear of any sharp objects that could puncture your float.
2. Fully open all air chambers.
3. Using an inflation device, inflate each chamber.

# Dual-action valves: inflate and deflate in a matter of minutes!
1. Ensure all dual-action valves are open and pulled out of the float body
2. Insert black mid-valve into the clear valve base. Ensure black mid-valve is fully inserted.
3. Insert any standard inflation device into the black mid-valve, hold firmly and inflate.
*Pro Tip: Insert a hair dryer (COLD AIR ONLY) directly into clear valve base to inflate!

# Standard large valves: Simply pinch the base of the valve while inflating. Secure the top plug into the valve opening when float is inflated.

4. Fully close all air chambers and ensure the air valves are pressed into the float.

Inflate your float slowly until most of the wrinkles in the float material are gone. Please note, there will still be wrinkles on the float when fully inflated, do not over-inflate to attempt to remove the wrinkles. When inflated, the air chambers feel firm to the touch. Do not over-inflate until hard.We recommend a foot pump or electric/rechargeable inflatable air mattress pump to inflate your float. Do not use air compressors or compressed air to inflate. Use of an air compressor or over-inflation can rupture the product beyond repair.

Changes in air temperature will cause air to expand or contract. This can cause serious damage to your float. Please use caution when leaving your float in direct sunlight as the sun will heat the float and cause the air to expand. You may need to release air from your float if your float is hot. Conversely, you may need to add air to your float when in-contact with cold water or if left outside overnight.

# Dual action valve : Simply pull the entire valve out of the float body and air will escape the float.

# Standard large valve : Pull out the top plug and pitch the base of the valve while applying light pressure to the float to cause the air to escape.

Your float will last for several amazing experiences with proper maintenance. After each use, please remove from the water and rinse with fresh water. Ensure float is completely dry. Deflate until flat, fold and store it in a cool, dry place with no UV exposure to protect against sun damage.

Floats are made with extra thick material to ensure the best floating experience. If your float is punctured, identify the puncture area. We recommend patching the leak with PVC tape. When deflated, clean the float around the puncture and ensure the area is completely dry. Patch the tape directly over the puncture. Press firmly and smooth to set the repair patch to the float. If your float has a slow leak, inflate your float one more time and ensure all the valves are fully closed.